Course information

CDM Regulations Training Outline 

Module 1: Introduction to CDM Regulations

  • Overview of CDM Regulations
  • Key Principles and Objectives of CDM Regulations
  • Role of CDM in Construction Safety and Health
  • Scope and Applicability of CDM Regulations

Module 2: Duties and Responsibilities

  • Duties under CDM Regulations
  • Roles of the Duty Holders
  • Client Responsibilities in CDM
  • Specific Duties of Designers and Contractors
  • Concept of the Principal Designer and Principal Contractor

Module 3: Documentation and Compliance

  • Introduction to the Pre-Construction Information
  • Developing Construction Phase Plans
  • Health and Safety File: Purpose and Contents
  • Legal Documentation and Record Keeping
  • Compliance Checks and Balances

Module 4: Risk Management

  • Principles of Risk Assessment in Construction
  • Identifying and Managing Construction Risks
  • Role of Designers in Mitigating Risk
  • Strategic Planning for Health and Safety
  • Importance of Continuous Risk Management

Module 5: Communication and Collaboration

  • Effective Communication among Duty Holders
  • Collaboration Techniques for Construction Projects
  • Role of Meetings and Briefings
  • Sharing Pre-Construction Information
  • Importance of Consultation with Employees

Module 6: CDM in Project Management

  • Integrating CDM into Project Management Practices
  • Lifecycle of a Construction Project under CDM
  • Planning for Safety from Concept to Completion
  • Monitoring and Reviewing Health and Safety Performance

Module 7: CDM for Small to Medium Enterprises (SMEs)

  • Impact of CDM on SMEs
  • Tailoring CDM Processes for Smaller Projects
  • Challenges Faced by SMEs and Solutions
  • Resources and Support for SMEs

Show moredowndown

Who should attend this CDM Regulations Training Course?

This training is essential for professionals involved in construction projects, including:

  • Project Managers
  • Construction Managers
  • Site Managers
  • Health and Safety Officers
  • Architects and Designers
  • Civil Engineers
  • Contractors and Subcontractors

Prerequisites of the CDM Regulations Training

There are no formal prerequisites for this course. This course is designed to be accessible for professionals with varying levels of experience in construction projects, from beginners seeking foundational knowledge to experienced professionals aiming to update their understanding of CDM Regulations.

CDM Regulations Training Course Overview

The Construction (Design and Management) Regulations (CDM) are essential for ensuring health and safety in construction projects. These regulations are designed to improve risk management and communication between stakeholders, ensuring that all parties understand their responsibilities from project design through to completion. Proper understanding of CDM regulations helps reduce accidents, improve working conditions, and ensure compliance with legal requirements within the construction industry.

This course is particularly beneficial for construction managers, site supervisors, architects, project managers, and designers involved in planning and executing construction projects. It also benefits health and safety officers, contractors, and anyone responsible for ensuring compliance with CDM regulations on-site.

This 1-day course by The Knowledge Academy equips professionals with the knowledge needed to implement CDM regulations effectively. Delegates will learn how to fulfil their duties under the regulations, improve project safety, and manage risks. The course covers essential aspects of compliance, reducing risks associated with non-compliance.

Course Objectives

  • To understand the legal framework and requirements of the Construction (Design and Management) Regulations
  • To identify the roles and responsibilities of duty holders under CDM regulations
  • To conduct effective risk assessments and implement appropriate control measures
  • To promote a culture of health and safety within construction projects
  • To ensure compliance with health and safety standards throughout the project lifecycle

Upon completion of the Course, delegates will possess the knowledge and skills necessary to navigate the complexities of construction health and safety regulations confidently. They will be equipped to contribute to safer work environments and ensure compliance with legal requirements in construction projects.

Show moredowndown

What’s included in this CDM Regulations Training?

  • World-Class Training Sessions from Experienced Instructors
  • CDM Regulations Certificate
  • Digital Delegate Pack

Why choose us

Our Boise venue

Includes..

Free Wi-Fi

To make sure you’re always connected we offer completely free and easy to access wi-fi.

Air conditioned

To keep you comfortable during your course we offer a fully air conditioned environment.

Full IT support

IT support is on hand to sort out any unforseen issues that may arise.

Video equipment

This location has full video conferencing equipment.

Boise is the capital city of the state of Idaho, it has an estimated population of around 215,000 people. Education in the USA is provided by both public and private schools, and is mandatory until the age of 16.  Pupils conducting their schooling within the USA start off at preschool, followed by elementary school, then middle school, before finishing at high school.  At age 18, US citizens are able to engage in higher education.  Higher education in the USA normally comes in the form of a college, undergraduate school, or a community college – that latter of which doesn’t normally cost anything to attend.  Candidates participating in a course at a college will gain credits towards a bachelor’s degree, whilst candidates participating a course at a community college will be earning credits in order to achieve an associate’s degree. The Boise School District oversees the running of 43 schools in the area including elementary, junior high, high and speciality schools. Higher education options in the city are limited and include Boise State University and a number of technical schools. There is also a satellite campus of University of Idaho (UI) and Idaho State University in the city. At The Knowledge Academy we offer over 50,000 classroom based training courses in the United States, including popular locations such as Boise.

Show moredown

Address

Boise, Idaho

T: +1 7204454674

Ways to take this course

Experience live, interactive learning from home with The Knowledge Academy's Online Instructor-led CDM Regulations Training Course in Boise. Engage directly with expert instructors, mirroring the classroom schedule for a comprehensive learning journey. Enjoy the convenience of virtual learning without compromising on the quality of interaction.

Unlock your potential with The Knowledge Academy's CDM Regulations Training Course in Boise, accessible anytime, anywhere on any device. Enjoy 90 days of online course access, extendable upon request, and benefit from the support of our expert trainers. Elevate your skills at your own pace with our Online Self-paced sessions.

Streamline large-scale training requirements with The Knowledge Academy's In-house/Onsite at your business premises. Experience expert-led classroom learning from the comfort of your workplace and engage professional development.

tailored_learning_experience

Tailored learning experience

Leverage benefits offered from a certification that fits your unique business or project needs

budget

Maximise your training budget

Cut unnecessary costs and focus your entire budget on what really matters, the training.

team_building

Team building opportunity

Our offers a unique chance for your team to bond and engage in discussions, enriching the learning experience beyond traditional classroom settings

monitor_progress

Monitor employees progress

The course know-how will help you track and evaluate your employees' progression and performance with relative ease

What our customers are saying

CDM Regulations Training Course in Boise FAQs

Please arrive at the venue at 8:45am.
We are able to provide support via phone & email prior to attending, during and after the course.
Delegate pack consisting of course notes and exercises, Manual, Experienced Instructor, and Refreshments
This course is [ ] day(s)
Once your booking has been placed and confirmed, you will receive an email which contains your course location, course overview, pre-course reading material (if required), course agenda and payment receipts
The training fees for CDM Regulations Training Coursein Boise starts from $1295
The Knowledge Academy is the Leading global training provider for CDM Regulations Training Course.
Show more down

Why choose us

icon

Best price in the industry

You won't find better value in the marketplace. If you do find a lower price, we will beat it.

icon

Many delivery methods

Flexible delivery methods are available depending on your learning style.

icon

High quality resources

Resources are included for a comprehensive learning experience.

barclays Logo
deloitte Logo
Thames Water Logo

"Really good course and well organised. Trainer was great with a sense of humour - his experience allowed a free flowing course, structured to help you gain as much information & relevant experience whilst helping prepare you for the exam"

Joshua Davies, Thames Water

santander logo
bmw Logo
Google Logo

Looking for more information on Health & Safety in the Workplace?

backBack to course information

Get a custom course package

We may not have any package deals available including this course. If you enquire or give us a call on +1 7204454674 and speak to our training experts, we should be able to help you with your requirements.

cross

BIGGEST HALLOWEEN
SALE!

GET THE 40% EXTRA OFF!

red-starWHO WILL BE FUNDING THE COURSE?

close

close

Thank you for your enquiry!

One of our training experts will be in touch shortly to go over your training requirements.

close

close

Press esc to close

close close

Back to course information

Thank you for your enquiry!

One of our training experts will be in touch shortly to go overy your training requirements.

close close

Thank you for your enquiry!

One of our training experts will be in touch shortly to go over your training requirements.