Course information

STAAD.Pro Training Course Outline

Module 1: Introduction to Structural Engineering

  • Structural Engineering
  • What is a Structure?
  • STAAD.Pro V8i
  • Getting Started

Module 2: Starting STAAD.Pro V8i

  • Methods of Model Generation
  • Translational Repeat
  • Circular Repeat
  • Insert Node
  • Add Beam

Module 3: Structure Model

  • Run Structure Wizard
  • Generation Structure Models
  • Merging the Generated Model in STAAD.Pro
  • Importing CAD Models

Module 4: Support

  • Support Specification
  • Support Page
  • Member Property
  • Member Offset

Module 5: Load

  • Loading- 1
  • Loading -2
  • Wind Load Generation
  • Assigning Wind Loads
  • Analysis
  • Concrete Design
  • Time History Analysis

Module 6: FEM

  • Introduction to FEM
  • Plate
  • Surface
  • Meshing

Module 7: Slabs

  • Design of Slab
  • Design of One-Way Slab
  • Design of Two-Way Slab
  • Design of Staircase
  • Design of Bridge using STAAD. Beava

Module 8: Bridge Deck Preprocessor

  • Bridge Deck Preprocessing Using STAAD.Beava

Module 9: Steel

  • Design of Steel Structures
  • Member Specification Table Member Property

Module 10: Seismic Loads and Wind Load Intensity

  • Calculate Natural Frequency of a Building by
    • Response Spectrum Analysis
    • Rayleigh Method
    • Modal Shape
  • Calculate Wind Load Intensity in a Building

Show moredowndown

Who should attend this STAAD.Pro Training Course?

A STAAD.Pro Training Course in Nashville is designed to provide participants with the knowledge and skills required to effectively use the software for structural analysis and design tasks. This course will benefit the following professionals:

  • Structural Engineers
  • Civil Engineers
  • Mechanical Engineers
  • Aerospace Engineers
  • Marine Engineers
  • Construction Engineers
  • Architects
  • Quality Control Engineers

Prerequisites of the STAAD.Pro Training Course

There are no formal prerequisites for this STAAD.Pro Training Course. However, prior experience or strong understanding of structural engineering is recommended but not mandatory.

STAAD.Pro Training Course Overview

STAAD.Pro, a comprehensive structural analysis and design software, is a cornerstone in the field of engineering and construction. This STAAD.Pro Training Course in Nashville introduces delegates to the capabilities of STAAD Pro and underscores its relevance in the analysis and design of diverse structures, from buildings to bridges. It stands out as one of the most important AutoCAD Courses in contemporary times.

Proficiency in STAAD Pro is crucial for professionals in Nashville in civil engineering, structural design, and construction management. Civil Engineers, Structural Analysts, and Project Managers should aim to master STAAD Pro, as it equips them with the tools to analyse and design structures subjected to various loads, ensuring the safety and integrity of their projects.

The 1-day training in Nashville by the Knowledge Academy empowers delegates with a comprehensive understanding of STAAD.Pro. Participants will learn the methods of model generation, eliminating trial-and-error approaches and potential errors. With experienced and professional trainers leading the way, delegates will gain the skills and knowledge needed to confidently design and analyze a wide range of structural projects.

Course Objectives

  • To understand the application programming interface for STAAD.Pro
  • To improve working experience and deliver a more robust solution
  • To classify and design a set of members as truss objects
  • To better optimize designs and automate repetitive processes
  • To define models using the various foundation support types
  • To improve performance, particularly when working with larger models

After attending this training course in Nashville, delegates will be able to use various forms of dynamic analysis, including modal extraction, time history, and response spectrum analysis. They will also be able to determine a rough solution to the Partial Differential Equation (PDE) and the integral equation.

Show moredowndown

What’s included in this STAAD.Pro Training Course?

  • World-Class Training Sessions from Experienced Instructors
  • STAAD.Pro Certificate
  • Digital Delegate Pack

Why choose us

Our Nashville venue

Includes..

Free Wi-Fi

To make sure you’re always connected we offer completely free and easy to access wi-fi.

Air conditioned

To keep you comfortable during your course we offer a fully air conditioned environment.

Full IT support

IT support is on hand to sort out any unforseen issues that may arise.

Video equipment

This location has full video conferencing equipment.

Nashville is the capital of the state of Tennessee. It is the second largest city in the state after Memphis. Nashville has an estimated population of around 660,000 people. It is known as a centre of the country music industry which has earned it the nickname of “Music City”. Education in the USA is provided by both public and private schools, and is mandatory until the age of 16.  Pupils conducting their schooling within the USA start off at preschool, followed by elementary school, then middle school, before finishing at high school.  At age 18, US citizens are able to engage in higher education.  Higher education in the USA normally comes in the form of a college, undergraduate school, or a community college – that latter of which doesn’t normally cost anything to attend.  Candidates participating in a course at a college will gain credits towards a bachelor’s degree, whilst candidates participating a course at a community college will be earning credits in order to achieve an associate’s degree. Metropolitan Nashville Public Schools run the school district of Nashville. There are 82,000 pupils attending 155 schools. There are many universities and colleges in the city of Nashville and the surrounding metropolitan area. The university with the largest enrolment is the Vanderbilt University with 12,000 pupils. It is ranked 216th in the world university rankings. One notable alumni from the Vanderbilt University is Al Gore, the former US Vice President. At The Knowledge Academy we offer over 50,000 classroom based training courses in the United States, including popular locations such as Nashville.

Show moredown

Address

TN, Nashville - Burton Hills 

40 Burton Hills Bvld 

Suite 200

Nashville

Tennessee 

37215

T: +1 7204454674

Ways to take this course

Experience live, interactive learning from home with The Knowledge Academy's Online Instructor-led AutoCAD Training | STAAD.Pro Training in Nashville. Engage directly with expert instructors, mirroring the classroom schedule for a comprehensive learning journey. Enjoy the convenience of virtual learning without compromising on the quality of interaction.

Unlock your potential with The Knowledge Academy's AutoCAD Training | STAAD.Pro Training in Nashville, accessible anytime, anywhere on any device. Enjoy 90 days of online course access, extendable upon request, and benefit from the support of our expert trainers. Elevate your skills at your own pace with our Online Self-paced sessions.

Streamline large-scale training requirements with The Knowledge Academy's In-house/Onsite at your business premises. Experience expert-led classroom learning from the comfort of your workplace and engage professional development.

tailored_learning_experience

Tailored learning experience

Leverage benefits offered from a certification that fits your unique business or project needs

budget

Maximise your training budget

Cut unnecessary costs and focus your entire budget on what really matters, the training.

team_building

Team building opportunity

Our offers a unique chance for your team to bond and engage in discussions, enriching the learning experience beyond traditional classroom settings

monitor_progress

Monitor employees progress

The course know-how will help you track and evaluate your employees' progression and performance with relative ease

What our customers are saying

AutoCAD Training | STAAD.Pro Training in Nashville FAQs

There hasn't been any questions asked about this Topic

The training fees for certification in Nashville starts from $1595
The Knowledge Academy is the Leading global training provider for .
Please see our courses available in Nashville
Show more down

Why choose us

icon

Best price in the industry

You won't find better value in the marketplace. If you do find a lower price, we will beat it.

icon

Many delivery methods

Flexible delivery methods are available depending on your learning style.

icon

High quality resources

Resources are included for a comprehensive learning experience.

barclays Logo
deloitte Logo
Thames Water Logo

"Really good course and well organised. Trainer was great with a sense of humour - his experience allowed a free flowing course, structured to help you gain as much information & relevant experience whilst helping prepare you for the exam"

Joshua Davies, Thames Water

santander logo
bmw Logo
Google Logo

Looking for more information on AutoCAD Courses?

backBack to course information

Get a custom course package

We may not have any package deals available including this course. If you enquire or give us a call on +1 7204454674 and speak to our training experts, we should be able to help you with your requirements.

cross

OUR BIGGEST SPRING SALE!

Special Discounts

red-starWHO WILL BE FUNDING THE COURSE?

close

close

Thank you for your enquiry!

One of our training experts will be in touch shortly to go over your training requirements.

close

close

Press esc to close

close close

Back to course information

Thank you for your enquiry!

One of our training experts will be in touch shortly to go overy your training requirements.

close close

Thank you for your enquiry!

One of our training experts will be in touch shortly to go over your training requirements.